Khuni Sealer Clear

Description

 Product Name: KHUNI SEALER 

Product Type: CONTRACTORS WOOD STABILIZING OIL 

Description: KHUNI SEALER is an oil/wax-based penetrating sealer that protects raw (uncoated) wood against water ingress, surface degradation and contamination. The high-quality blend of drying oils and water repellent wax components deeply penetrates, stabilizes and nourishes the wood. It therefore acts as a transit stabilizer and protective sealer that prevents excessive checking and splitting of pre-manufactured timbers during transport and storage and also repels waste splashes during building construction. 

KHUNI SEALER can also be used as a final finish on wood provided that a second and preferably a third coat is applied 24 hours after applying the first coat. It, however, does not provide additional protection against potential fungal and insect attack. KHUNI SEALER dries to a clear, slightly brownish matt finish. 

Should a durable, high quality exterior finish be required, it is recommended that SATINWOOD 28/28 Base be applied as a final coat as it contains additional wood stabilizing agents as well as fungicides and insecticides that provide added protection against mould growth, fungal staining and insect attack. 

Active Ingredients: Drying oils and Waxes in organic solvent carrier 

Physical Characteristics: Appearance - Transparent amber colour Solubility - Solvent borne Density @ 20C - ± 0,79 – 0,89 kg/ℓ 

Use Restriction: Not to be used on previously coated timber surfaces. Remove old coatings and sand surface before application. 

Application: Brush, spray or dip. MIX WELL BEFORE USE. 

Application Rate: 5 m2 – 10 m2 per ℓ per coat. If used as a final finish, apply a second coat and preferably a third coat 24 hours after applying the first coat. 

Dilution Rates: Ready for use. DO NOT DILUTE. 

Storage: Storage temperatures should not exceed 40C. Keep container sealed.

Packaging: 1ℓ, 5ℓ, 20ℓ, 25ℓ and 200ℓ containers. 

Note: Caution: The product is flammable. Avoid open flames.